Live View


Start Live View

Steps:
  1. In the Live View interface, click to enter the Camera List interface, select the camera(s) or device for live view.
    Refer to the following description for the icons on the Camera List interface.
  2. Icon Description
    / Device icon.
    Camera icon.
    Select the camera or device for live view.
    Back to Live View interface.
    Add the commonly used camera(s) to the favorites.
    Favorites icon.
  3. Click Start Live View to start live view of the selected cameras. During multi-window division mode, you can drag and move the window to adjust the window sequence.
    Refer to the following description for the icons on the Live View interface.
  4. Icon Description
    Go to the Camera List interface.
    1/4/9/16-window division.
    Select a camera for live view.
    Capture picture of the selected live view window.
    Record the video of the selected live view window.
    PTZ control panel.
    Image quality panel.
    Stop all the live view.
    Audio control.
    Two-way audio.
    Alarm output control panel.
    Digital zoom.

Stop Live View

During the live view, you can click to stop live view of all cameras.
Or you can perform the following steps to stop live view of the specific camera.

Steps:
  1. Click and hold the live view window.
  2. Drag the window upwards, and the icon shows on the top of the window.
  3. Drag the window to the until it changes to and then release the window.

PTZ Control

Click to activate the PTZ control panel.

Icon Description
Start / stop the auto-scan.
Zoom control: Zoom+ / Zoom-
Focus control: Focus+ / Focus-
Iris control: Iris+ / Iris-
Set, delete and call the preset.

Under PTZ control mode, you can slide on the live view window to realize the pan left/right and tilt up/down movements. You can also pinch two fingers together to zoom out or spread them apart to zoom in the live view.

Setting / Calling a Preset

Steps:
  1. Slide on the live view window to move the camera to the desired scene.
  2. Click and then set the preset No. (1~256) in the pop-up dialog box.
  3. Click Set to finish the preset settings. You can click Delete to delete the preset. For the programmed preset, you can set the preset No. and click Call to call it.

Image Quality

There are two defined image quality types provided, including Clear and Fluent. And you can also customize the image quality. Click to adjust the quality according to the performance of your network and phone hardware.
Note: If you change the image quality, the live view and recording of the device may be affected due to the new settings.

Customize the Image Quality

Steps:
  1. Click Custom to activate the customized panel.
  2. Configure the parameters according to actual needs, including Stream Type, Resolution, Frame Rate and Bitrate.

Alarm Output Control

You can control the alarm outputs of the added device by the software.

Steps:
  1. Slide the control panel to show more icons.
  2. Click to activate the alarm output control panel.
  3. Select an alarm output and click it to set it as to enable this alarm output.

Digital Zoom

You can realize the digital zoom during live view.

Steps:
  1. Click and the selected window will be display in 1-division mode.
  2. Spread two fingers apart to zoom in or pinch them together to zoom out the live view. Or you can double-click on the live view image to realize digital zoom.

Full-screen Live View

During live view, you can rotate the phone to enter the full-screen mode.