MIFARE Classic ToolMCT

hulpmiddelen

Download MIFARE Classic ToolMCT for PC/Laptop/Windows 7,8,10.

Wij bieden MIFARE Classic ToolMCT 2.3.1 APK bestand voor Android 4.0+ en omhoog.
MIFARE Classic ToolMCT is a free Tools app.
Het is eenvoudig te downloaden en op uw mobiele telefoon te installeren.
Please be aware that We only share the original and free pure apk installer for MIFARE Classic ToolMCT 2.3.1 APK zonder enige aanpassingen.

De gemiddelde beoordeling is 4.30 uit 5 sterren in de playstore.
If you want to know more about MIFARE Classic ToolMCT then you may visit IKARUS Projects support center for more information

Alle apps & De spellen hier zijn alleen voor thuis- of persoonlijk gebruik. Als een APK-download inbreuk maakt op uw auteursrecht,
neem dan contact met ons op. MIFARE Classic ToolMCT is the property and trademark from the developer IKARUS Projects.

This is an Android NFC-App for reading, writing, analyzing, enz. Mifare Classic RFID-Tags.

GENERAL INFORMATION
This tool provides several features to interact with (En alleen met) Mifare Classic RFID-Tags.
It is designed for users who have at least basic familiarity with the Mifare Classic technology.

┏━┫ PLEASE READ ┣━
┃Please read the whole page and make sure you got everything right before rating. Bedankt!
┃If you rate with less then 4 sterren, please leave a comment why. This way I can improve this app.
┃If you like MCT please consider to buy the donate version.

┃The Mifare Classic support for HTC One M8/M7 is broken since Android 5.0+. MCT has a
┃workaround that hopefully will work for most users. The real issue has to be fixed by HTC.
┗━

FUNCTIES
• Read Mifare Classic tags
• Save and edit the tag data you read
• Write to Mifare Classic tags (block-wise)
• Clone Mifare Classic tags
(Write dump of a tag to another tag; write \’dump-wise\’)
• Key management based on dictionary-attack
(Write the keys you know in a file (dictionary).
MCT will try to authenticate with these
keys against all sectors and read as much as possible.)
• Format a tag back to the factory/delivery state
• Write the manufacturer block of special Mifare Classic tags
• Create, edit and save key files (dictionaries)
• Decode & Encode Mifare Classic Value Blocks
• Decode & Encode Mifare Classic Access Conditions
• Compare dumps (Diff Tool)
• Display generic tag information
• Display the tag data as highlighted hex
• Display the tag data as 7-Bit US-ASCII
• Display the Mifare Classic Access Conditions as a table
• Display Mifare Classic Value Blocks as integer
• In-App (offline) help and information
• It\’s open source (GPLv3) 😉

IMPORTANT NOTES
Some important things are:
• The features this tool provides are very basic. There are no such
fancy things like saving a URL to an RFID-Tag with a nice looking
graphical user interface. If you want so save things on a tag,
you have to input the raw hexadecimal data.
• This App can NOT crack/hack
any Mifare Classic keys. If you want to read/write an RFID-Tag, you
need keys for this specific tag first. For additional information
please read/see Getting Started from the links section.
• There will be no \brute-force\attack
capability in this application. It is way too slow due
to the protocol.
• The first block of the first sector of an original
Mifare Classic tag is read-only i.e. not writable. But there
are special Mifare Classic tags that support writing to the
manufacturer block with a simple write command. This App is able to
write to such tags and can therefore create fully correct clones.
However, some special tags require a special command sequence
to put them into the state where writing to the manufacturer block is possible.
These tags will not work.
Remember this when you are shopping for special tags!
• This app will NOT work on some devices because
their hardware (NFC-controller) does not support Mifare Classic
( https://github.com/ikarus23/MifareClassicTool/issues/1 ).
You can find a list of unsupported devices here:
https://github.com/ikarus23/MifareClassicTool#general-information

LINKS
• Project Page on github:
https://github.com/ikarus23/MifareClassicTool
• MifareClassicTool on F-Droid:
https://f-droid.org/repository/browse/?fdid=de.syss.MifareClassicTool
• Getting started & other help:
https://github.com/ikarus23/MifareClassicTool#getting-started
• Bug tracker:
IF YOU ENCOUNTER A PROBLEM PLEASE REPORT IT HERE
https://github.com/ikarus23/MifareClassicTool/issues
• Additional stuff:
http://publications.icaria.de/mct/
• Thread at the Proxmark3 Forum:
http://www.proxmark.org/forum/viewtopic.php?id=1535

MIFARE is a registered trademark of NXP Semiconductors.

Versie: 2.3.1

Bestandsgrootte: 1.09MB

Vereist: Android 4.0+

Pakketnaam: de.syss.MifareClassicTool

Ontwikkelaar: IKARUS Projects

Bijgewerkt: Kunnen 04, 2019

Prijs: Vrij

Tarief 4.30 sterren – gebaseerd op 960 beoordelingen

Just Download Latest Version MIFARE Classic ToolMCT Apk For PC,Laptop,Windows 7,8,10,Xp nu! To Download MIFARE Classic ToolMCT App For PC,gebruikers moeten een Android-emulator zoals Mumu-speler installeren. Met Mumu-speler,you can Download MIFARE Classic ToolMCT App for PC version on your Windows 7,8,10 en laptop.

How to Play MIFARE Classic ToolMCT App on PC,Ramen

1.Download en installeer Mumu Player Android-emulator. Klik "Mumu-speler downloaden" downloaden.

2.Voer de Mumu Player Android-emulator uit en log in op de Google Play Store.

3.Open Google Play Store and search the MIFARE Classic ToolMCT and download,

Of importeer het apk-bestand van uw pc in Mumu Player om het te installeren.

4.Install MIFARE Classic ToolMCT App for PC.Now you can play MIFARE Classic ToolMCT App on PC.Have fun!